Ostoskori on tyhjä.


Ostoskori on tyhjä.


Klarna-palvelun avulla voit helposti, joustavasti ja turvallisesti tehdä ostoksia.  Käytössäsi olevat vaihtoehdot ovat Lasku, erämaksu, verkkopankit ja luottokortit - kaikki yhtä turvallisia!
Klarna on frontpage


Facebook Tutustu Kruunuradion Facebook-sivuihin

Liity ystäväksemme Facebookissa!


Audio-Technica AT-F2

Audio Technica AT-F2 - Moving Coil Cartridge (MC) äänirasia

With a high-quality sound comparable to more expensive models, the AT-F2 provides outstanding value and performance, which delights those who appreciate the sound quality of analogue records.

Diameter stainless suspension wire
The AT-F2 uses 0.07 mm diameter stainless suspension wire, which serves an important role as a fulcrum point for audio signal transfer. This stainless wire is used for higher quality MC-type cartridges. This stabilises the fulcrum position and enables auditory lateralisation to provide excellent expression of the high-frequency range.

Neodymium magnet for dramatically increased magnetic energy
The neodymium magnet provides maximum energy (BHmax of 50[kJ/m3]), while the pure iron yoke provides excellent magnetic properties. Together, they further boast the magnetic field concentrated in the coil gap area.

PCOCC used for coils and terminal pins
PCOCC does not give rise to crystalline resistance in the transmission direction, enabling audiophiles to enjoy pure transmissions.

Dual moving coil with high separation and wide response
Our unique moving coil type cartridge has a basic structure where one cylindrical coil is used for the left channel and another is used for the right channel. This structure by which power is generated independently for the left and right channels physically provides outstanding separation characteristics. The leakage of signals from one channel into the other exerts a decisive influence on the stereo expanse as well as on the sound quality. This is because this leakage is tantamount to creating irregular cross modulation. The reason why the dual moving coil system delivers such a clear and finely delineated sound quality is no doubt due to the system’s naturally excellent separation. The AT-F2 features a reverse V-shaped formation for the two left and right coils to reduce the vibration mass as seen from the stylus tip.

Durable construction dedicated to achieving increased rigidity
Using a precision-crafted sturdy aluminium alloy as the base, the body’s structure is made of hard resin which minimises parasitic resonance. This achieves greater rigidity and improves signal-to-noise ratio.


Features our celebrated dual coil design and elliptical stylus
Class leading quality of sound and reliability
Neodymium magnet is employed for maximum energy
PCOCC coil enables purer transmission
Power is generated independently for the left and right channels
Precision-crafted sturdy aluminium alloy base


Type: Dual Moving Coil
Mounting: 1/2" Centers
Frequency Response: 15 - 30,000Hz
Body Material: Aluminium/Synthetic Resin
Channel Separation: 25dB (1kHz)
Output Channel Balance: 1.5dB (1kHz)
Output Voltage: 0.32mV (1kHz and 5cm/sec.)
Vertical Tracking Angle: 23°
Vertical Tracking Force Range: 1.8 - 2.2g (2.0g standard)
Stylus Shape: Elliptical
Stylus Curvature Radius: 0.3 x 0.7 mil
Stylus Construction: Bonded Round Shank
Cantilever: Aluminium
Coil Impedance: 12Ω (1kHz)
Coil Inductance: 25µH (1kHz)
DC Resistance: 12Ω
Static Compliance: 35×10-6cm/dyne
Dynamic Compliance: 9×10-6cm/dyne (100Hz)
Terminal Pins: Brass
Recommended Load Impedance: Min 100Ω
Weight: 5g
Dimensions: 17.3 (H) x 16.8 (W) x 25.4 (L) mm

Kun neula on vaihtokuntoinen, vaihda koko äänirasia (MC)

Valmistaja: Audio-Technica
Selite: AT-F2
Hinta: 199.00

Kysy lisää

Haluatko lisätietoja tuotteesta tai sopia henkilökohtaisen palveluajan?

Soveltuvat tuotteet